Shop by Price
Shop by Brand

Medal Rose 38mm small

Medal Rose 38mm small
  Zoom
Medal Rose 38mm smallMedal Rose 38mm smallMedal Rose 38mm small


Our Price:  £2.10Earn 2 Loyalty Points
+
Colour:  
Ribbon:  
Printable Insert Colour:  
Image 1 - upload your artwork:  
Additional Information / Special Instructions:  
Presentation:  



Rose patterned medal approx 38mm diameter. It comes with your choice of coloured printable insert which has a 25mm diameter print area

 

Insert colours:

Gold Mirror Finish

Gold Brushed Finish

Silver Mirror Finish

Silver Brushed Finish

Copper Brushed Finish

White

 

Please be aware that different metal finishes will produce different results - on the coloured inserts the finish will be quite subtle with NO WHITE PRINT - anything that is white on your design will only show as clear, and therefore will show as the colour of the chosen insert.

The WHITE insert is the best option if you have a full colour image

HOW TO SEND YOUR ARTWORK:
Format: Jpeg or PDF
Colour: CMYK
Resolution: 300dpi
Bleed Area: 3mm
Fonts: Must be embedded or converted to curves
No printer marks/crop marks or colour bars
NOTE: RGB & Pantone colours will be converted automatically to CMYK and colours may change in the print process - so please supply in a CMYK format to avoid any colour issues.

ARTWORK CHECKING SERVICE:

If you are not sure about your final artwork, don't worry - we will always check it over before going to print and highlight any potential issues with you before proceeding.

If in doubt at any time - just give us a call on 01777 594101 (Mon-Fri 9am-5pm / 9am-1pm Sat), and a member of our team will be able to help.

USE OF IMAGES:

Please be sure that you have full permission / license to use any logo or images on your artwork.  By placing your final order it will be presumed that you hold the correct license/permission to do so. IronTree Designs will hold no responsibility for misuse of images / logos.

 

 

WHY WE NEED ‘BLEED’

This guide will explain what “bleed” is and why it is needed, with illustrations to help you too.

What Is Bleed?
When text or images run to the edge of a sheet of paper, bleed is required. Due to the process of commercial printing, it cannot print to the edge of a sheet of paper like your home printer. Multiple pages are printed on much larger sheets of paper and then cut down to size.
As it is impossible to cut right to the edge of your design, we need a little over the actual ‘finished’ edge of your print as waste cut off or ‘bleed’ edge.

How Much Bleed Do I Need?
The industry standard is to have 3mm of bleed on each edge and a 3mm safe zone inside. This means that the length of each side will be 6mm longer. For example an A4 sheet when lined up correctly with bleed will be 216mm x 303mm. It will then be cut down to its finished size of 210mm x 297mm. 

What Is the Safe Zone?
The safe zone is the 3mm inside of the cutting edge in which no text or important information should be placed. Any graphics in this area risk being clipped when cutting.