Recently Viewed

Folded Flyers A4 start size

Folded Flyers A4 start size
Folded Flyers A4 start sizeFolded Flyers A4 start sizeFolded Flyers A4 start size

Our Price:  £73.00
Earn 73 Loyalty Points
Paper Thickness
Flyer Quantity
Fold Type
Design Services
Image 1 - upload your artwork or photo
Image 2 - upload your artwork or photo
Additional Information / Special Instructions

Model:  flyfld150/250half

For our FOLDED flyers / leaflets,  you have a choice of 150gsm paper, 250gsm paper or 350gsm cardstock, & with a choice of 3 folds - Half Fold, C-Fold or Z-Fold


A4 folds in HALF to A5 size / A4 C-fold or Z-fold to DL size (210x99mm)

Simply upload your design in PDF/X-1a format (be sure to convert all your text to 'curves'. We can also use a good quality JPG file.

Please follow the guidelines in the template below as we need to allow for a 'bleed edge' which will be cut off during the finishing process. Once we have received your images, we will check your artwork and send you a proof copy for approval BEFORE we begin any print process.




(opens in a pop up window)


If you would like us to design your flyers for you, then this will incur an additional, one off fee of £25.00*. You will need to provide us with all logos, any content you would like including on the flyer, colour scheme ideas & any preferred fonts as a general design guide. The more information you can give will enable us to produce a better design.

A member of our team will then produce a screen proof for you to check and approve within 48hrs. You will be allowed to change design elements up to 3 times from the first draft proof. Please be aware that this process may delay despatch of your item for up to 7 days.

*this is non-refundable once the first proof has been sent to you.

Format: Jpeg or PDF
Colour: CMYK
Resolution: 300dpi
Bleed Area: 3mm
Fonts: Must be embedded or converted to curves
No printer marks/crop marks or colour bars
NOTE: RGB & Pantone colours will be converted automatically to CMYK and colours may change in the print process - so please supply in a CMYK format to avoid any colour issues.


If you are not sure about your final artwork, don't worry - we will always check it over before going to print and highlight any potential issues with you before proceeding.

If in doubt at any time - just give us a call on 01777 594101 (Mon-Fri 9am-5pm / 9am-1pm Sat), and a member of our team will be able to help.


Please be sure that you have full permission / license to use any logo or images on your artwork.  By placing your final order it will be presumed that you hold the correct license/permission to do so. IronTree Designs will hold no responsibility for misuse of images / logos.




This guide will explain what “bleed” is and why it is needed, with illustrations to help you too.

What Is Bleed?
When text or images run to the edge of a sheet of paper, bleed is required. Due to the process of commercial printing, it cannot print to the edge of a sheet of paper like your home printer. Multiple pages are printed on much larger sheets of paper and then cut down to size.
As it is impossible to cut right to the edge of your design, we need a little over the actual ‘finished’ edge of your print as waste cut off or ‘bleed’ edge.

How Much Bleed Do I Need?
The industry standard is to have 3mm of bleed on each edge and a 3mm safe zone inside. This means that the length of each side will be 6mm longer. For example an A4 sheet when lined up correctly with bleed will be 216mm x 303mm. It will then be cut down to its finished size of 210mm x 297mm. 

What Is the Safe Zone?
The safe zone is the 3mm inside of the cutting edge in which no text or important information should be placed. Any graphics in this area risk being clipped when cutting. 


IronTree Designs Ltd